Description

Type:	Grooved Type (Standard)
Luminous method:	Non-modulated
Sensing method:	Through-beam type
Sensing distance:	5 mm (slot width)
Operation mode:	Dark-ON/Light-ON (selectable)
Standard sensing object:	Opaque object (2 x 0.8 mm min.)
Differential distance elements:	0.025 mm max.
Light source (Peak wavelength):	Infrared LED (940 nm)
Indicator:	No incident light (red)
Power supply voltage:	5 to 24 VDC ±10% (ripple (p-p)10% max.)
Current consumption:	12 mA max. (L terminal open)
Control output (Output type):	NPN open-collector output
Control output (Load power supply voltage):	5 to 24 VDC
Control output (Load current):	100 mA max.
Control output (Residual voltage):	0.8 V max. (at 100 mA load current) 0.4 V max. (at 40 mA load current)
Protection circuits:	Output short-cut protection
Response frequency elements:	1 kHz min. (average 3 kHz)
Illumination on the surface receiver:	Fluorescent light: 1000 lx max.
Ambient temperature:	Operating: -25 to 55 ℃ Storage: -30 to 80 ℃
Ambient humidity:	Operating: 5 to 85% RH Storage: 5 to 95% RH
Vibration resistance:	20 to 2000 Hz, peak acceleration 100 m/s**2, 1.5-mm double amplitude 2 h each in X, Y, and Z directions (4 min periods)
Shock resistance:	500 m/s**2, 3 times each in X, Y, and Z directions
Degree of protection (IEC60529):	IP50
Connection method:	Connector type (direct soldering possible)
Material:	Case: Polybutylene phthalate (PBT) Emitter/Receiver Cover: Polycarbonate(PC)